Drop stitch moebius cowl

Drop stitch moebius cowl
"The 80's will never die!"

This pattern is available on Ravelry!

Downloadable version

Fingerling weight/sock yarn. I used:

Wild Hare Fiber Studio Hand Dyed Pinnacle Sock Yarn

colorway: Neon Lights

My cowl only took about 2/3 the hank. so this does not use much yarn at all! This particular yarn is UV reactive and will glow under black light

needle: Size 5 interchangable and a smaller size for the opposite end (I used a size 2 on the other end of mine) This will allow you to easily get all the wraps off the cord after they have worked their way around the cable. If you cannot use 2 different sized needles, this will be difficult to make! the stitches choke up on the cable as they work their way around the needle and are difficult to get back off to work them.


Co 155 (multiples of 10+5. Total stitch count will be multiples of 20+10) stitches using cats moebius co. To make the stitch pattern line up properly on both sides of the co edge you need to co in multiples of 10 + 5 giving you a total stitch count of multiples of 20 + 10.

For more information about the moebius cast on and other things about the moebius (including how to deal with wrong stitch counts), see my post: Demystifying the moebius!

Setup round: Place marker at the start of the round and purl one complete round. The 1st half will be really difficult to work as you don't have stitches, but just loops and the loops will be tight on the cabel. To help with this I have interchangeable needles and put the smallest tip I have (a size 2 in my set) on the end I knit my stitches off from. The 2nd half will be easier to knit. This also helps when knitting into the row with all the yo's as they tend to choke up on the cable as its being worked.
Round 1: (k6, yo, k1, yo 2, k1, yo3, k1, yo2, k1, yo) repeat to end, m1

Round 2: purl all stitches. On multiple yo's, purl the 1st wrap while dropping the rest as you work

Round 3: knit

Round 4: purl

Round 5: k1, (yo, k1, yo2, k1, yo3, k1, yo2, k1, yo, k6) repeat to end

Rounds 6, 7, and 8 are the same as 2, 3, and 4

*Only work the M1 on round 1. On all other repeats, just work this as a single knit stitch at the end of the row!

Repeat rounds 1 - 8 until the cowl is the desired width. Bind off loosely.

I did not block mine as I like the texture and ripply look of the fabric.

Moebius bubble cowl/scarf

Moebius Bubble Cowl

 

This pattern is available on Ravlery!

PDF Chart download

Yarn: premier yarns "wool-free lace"
Needles: size 2

This yarn, though labeled "lace" is more like a sock (fingerling) yarn. This pattern is easily modified for any yarn. The thicker the yarn you use, I recommend doing your sections with less stitches. Use the needle size recommended for your yarn. The finished cowl is quite warm and the stitch pattern allows plenty of stretch if you desire to use it as a hood.

I also like to use stitch markers at each knit/purl transition point.

Here is a sample of this same stitch in a thicker, hand spun yarn worked on size 6 needles and it is a 6x6 rib. this yarn is pretty much worsted.




If you intend to make this a cowl, you can either cast on provisionally and graft or do a 3 needle bind off, or cast on regularly and seam. Of course grafting will result in a seamless cowl and have a post here that deals with working the Kitchener Stitch (grafting) in pattern. It's a useful skill to have and not nearly as complicated as it may seem once you understand it.
 

I have this pattern charted. it's a simple pattern to adapt and also makes a great scarf if you don't want to make a moebius. As written, it's basically a 10 stitch by 10 row checker of tight and dropped stitches with twisted stitches to help keep it all tidy on the edges of the transition points. A 10x10 rib that creates a reversible bubble effect.

A close up of the stitch pattern at the point where I grafted the ends together.

You can read more about creating moebius knits here: Demystifying the moebius!

I did not block this. If you block it, you will loose the texture of the bubbles.

Demystifying the moebius!

I have a couple new moebiuses to post but thought I would post a little trouble shooting and tips post first.

For starters, when I cast on for a center out moebius I use my longest cables. I believe the are 60". I use this for all my center out moebius knits. It's the most comfortable length for me. I also like to put a small tip on the end that i will be knitting off. this makes it easier to get the stitches off the cable.

When it comes to cowls, the moebius is my preferred shape as it lies flat and you don't have any bunching at the twist.

This is regarding the center out moebius knit in the round. You can adapt any stitch pattern that looks good on both sides to a moebius knit! It doesn't even have to be the same on both sides, just has to look good.

I always use Cat's moebius co. YouTube link It's a brilliant and super fast co. But its also incredibly sloppy and somewhat difficult to count as you don't have any actual stitches on the needles until you knit 1/2 way around on round 1. Before that it's just yarn wrapped around the needles and cord.

When casting on you count the stitches being wrapped around the needle only. Each set of wraps creates a wrap on top and on the bottom cord, but only count the top!

If you are converting a regular circular cowl to a moebius, co the same amount the pattern recommends (counting top only).

When converting a nesting pattern like chevrons or drop stitch (as in the cowl I'll be posting) or a staggered pattern. You want to cast on in what ever your pattern stitch repeat is + 1/2 that. If your stitch repeat is 8, for example, you want to cast on in multiples of 8+4. The 1/2 count will let the pattern nest above and below the co line. Your grand total, on a 8 stitch repeat will be a multiple of 16+8 counting all stitches (top and bottom). Here is the cast on of the Moebius waves of Color cowl with 1/2 the stitch repeat added so that it nests (I did a few modifications to the original as well which I detailed on my Ravelry project page).

Now I have yet to cast on a center out moebius and have an accurate stitch count. It could be because its such a fast co that my hands work faster than my brain.

So after I cast on and when I'm working the 1st round, I place markers for counting. Of course ALWAYS use something to mark the start of the round! I place small markers every 20 or so stitches. If you need to adjust your stitch count, make sure to balance it on both sides of the co line! This is extremely important on nesting designs!

If you find you need to add stitches, do it in sets. If you need to add 2 stitches do a M1 and in that same spot on the other side use a locking marker and place it between the stitches on the other side so you know you need to m1 in that spot when you get there. A strand of scrap yarn tied around the spot works to.

If you have to many stitches, decrease in sets as well. K2tog and place a locking marker through 2 stitches on the other side so you know to knit them together when you get there.

You need to increase/decrease in this way for fixing stitch counts to maintain the same amount of stitches above as below to keep things lined up properly when you start your pattern.

Working a moebius flat and seaming into shape

Another cowl I made uses a 20 stitch repeat of 10x10 ribbing. When doing something like this you want a reversible pattern and offset design. When working the cowl, I work it flat like a scarf and seam it on the short ends into a moebius. In ribbing you want your rows to end opposite of how they start. Start with knits, end with purls. When you add the 1/2 twist the sides will line up.

You will also want to make sure any row repeats line up properly. The bubble cowl I made started with a bubble on the 1st column repeat. So I needed to end with a bubble being in the 1st column again so that when the twist was made it lined up properly on the other side. If you have a ribbing pattern and knits are on the left, you want to end with purls on the right so it lines up when grafted.

Also, this type of cowl requires grafting in pattern which isn't nearly as complicated as it sounds. I have a post describing how to Kitchener in pattern which will enable you to Kitchener any combinations of knits and purls. It will also help you to understand what you are doing and to tell where you are at if you have to set it down.

This is the seam of my recent pattern Bubble Moebius cowl.
The seam is the last grey row to the right of the skinny grey strip on the left. On the right you see it flat as a WIP. If you look you will notice that the bubble on the left is knit and the bubble on the right is purl. this needs to be offset like this to be able to make the 1/2 twist required to complete the moebius shape.